Paint pot 10 l - Manual mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints). Always refer to the paint manufacturer's data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the paint to prevent it from separating.
Accessories to use with paint pot:
- - PQ2 Spray gun for paint pot - Ø 2.0mm
- - PQ2 Spray gun for paint pot - Ø 2.2mm
- - PQ2 Spray gun with fluid and air hose 7.5m long - Ø 2.2mm
- - Fluid and air hose 7.5m long
Features:
- Powder coated tank finish that is easy to clean
- Clamp on lid with air tight seal gasket
- 4 easy roll casters with wide base for increased stability
- Stainless steel fluid pickup tube with filter screen
- Carrying handle
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|
| Description | Specification |
| Paint pot capacity | 10 litres |
| Working pressure | 1.4 - 2.1 Bar |
| Feed type | Pressure feed |
| Max pressure | 6.3 Bar |
| Air inlet thread | 1/4 BSP |
| Fluid hose outlet thread | 3/8 BSP |
| Agitator | Manual |
SG PP10Pneumatics > Spray Finishing > Spray Gun Accessories
